Deadbolt lock will not turn install#

Safely store the finger lock and check ball security once you have removed them. Watch out for the check ball and ensure it is secure on one end and the finger lock is on the opposite before you completely slide it out.īefore anything, you should have a safe place where you can store the parts to avoid losing them. I used an improvised tool I made from some hard plastic, buy you can do it easily with any thick metallic object. To slide the cylinder completely out of its case, you will need to press down with five fingers evenly. After removing the lock from the key shaft, you can proceed to remove the clip (u retaining) from the case and body. Start by disassembling the lock, it is easy and won’t take a lot of your time. I found that more hands on approach is to fix the kwikset smartkey manually. This is how you can fix your kwikset smartkey lock malfunction To maintain my sense of security, I decided to find a quick solution to the problem. Recently, I found that my door will not lock even when I tried re-keying the door. Lucky for me, I only need to rekey the locks to change the keys. Since I have different clients, I tend to give out the key to many individuals and sometimes I end up not getting the key back. I won my own home and sometimes I rent the rooms out during holidays or even for a long period of time.

Deadbolt lock will not turn install#

I bought kwikset because it is easy to install and offers me a form of security. If the set screws are damaged or rusted, they will need to be replaced before closing the faceplate.What do you do when your kwikset smartkey lock will not turn? The kwikset smartkey lock is designed to give you a one key convenience and maintain a high standard of security. All you might have to do for some locks is remove the faceplate, but others might require you to remove part of the lock. To fix this, you will need access to the set screws that hold the cylinder in place. But this is dangerous because you could be unable to gain entry into your home, or strangers can have access to your home at any given time. If you insert the key and the whole lock cylinder turns, it usually indicates a damaged or loose set screw. Instead, grab a Phillips-head screwdriver and tighten the screws holding on the mechanism in most cases, this will work.

The longer a loose handle or lock goes unfixed, the more likely you are to find yourself stuck outside when the lock stops functioning. Loose Handles & LocksĪs time passes, door hinges, handles, and locks can become worse for wear. These are both issues that have to be assessed and corrected by a locksmith. Similar to a stiff lock, you can try lubricating the lock, but if that doesn’t help, there could be a misalignment of the lock and door or another, more challenging problem with the lock cylinder. If your key doesn’t turn in the lock, make sure not to force it to turn, as it could break the key. If the lock is the problem, we recommend contacting a locksmith as a new lock may need to be installed. If you have another key for the lock, use it to test if the key or the lock is causing the problem. If this isn’t the issue, test to see if the key was poorly cut. While it may seem obvious, make sure that you are using the right key for that lock. We advise avoiding oil-based lubricants, such as WD-40, which can lead to further clogging issues down the road.

Graphite spray or silicone-based lubricants can fix this problem by applying the product and turning the key a couple of times. Sometimes, dirt and dust can build up inside a lock, making it difficult for the locking mechanism to turn. If none of these work, you will need to call a locksmith who can fix or replace the mechanism. If the lock itself is the problem, you will need to loosen the door hinges and adjust the door, so it’s parallel with the doorjamb. To fix this, first, unscrew the mechanism until you can move it around, then reposition the deadbolt and strike plate so they are aligned and re-tighten the screws.

Yanking and pulling on handles or aggressively swinging doors open and closed could knock the deadbolt and strike plate out of alignment. The heat and humidity in Florida can cause doors and their jambs to warp, making the bolts and strike plate sit askew. If the key needs some force to come out, we recommend contacting an experienced locksmith in Gainesville, FL, instead. Make sure that when you remove the broken key that you pull straight out instead of at an angle, as this can cause the key to break more. You can use needle-nose pliers to remove the broken key if there is enough of it visible outside the lock. If a key breaks inside the lock of your home, don’t try to lock or further unlock the door using the broken piece of the key. Consult With Our Experts Key Breaks In The Lock